Canon

Canon BJ-330 Driver

Canon BJ-330 Driver

Canon BJ-330 driver

Canon BJ-330 Driver. For Canon BJ-330 printer, a driver is essential to enable the link in between your individual Canon BJ-330 printer & a COMPUTER. If car driver is missing out on Canon BJ-330 stop working

Canon BJ-330 Specs
  • Printer Type; Personal printer– ink-jet– monochrome
  • Form Factor; desktop computer
  • Manufacturer; Canon
  • Voltage Required Margin; ± 10%
  • Type; power supply
  • Nominal Voltage; Air Conditioner 120/230 V
  • Frequency Required; 50/60 Hz
  • Technology; ink-jet
  • Print Speed; Up to 300 char/sec
  • Connectivity Technology; wired
  • Interface; Parallel
  • PostScript Support; not available
  • Language Simulation; EPSON LQ, IBM PPR, IBM XL24 E
  • Type; personal printer
  • Max H-Document Size; 17 m
  • Max V-Document Size; 23.4 in
Canon BJ-330 OS Compatible;-LRB-
  • Windows ® 7, Windows Vista ®,
  • Windows XP and also Mac OS ® X v104.11 to v106. x9
  • Windows Vista SP1, Vista SP2
  • Windows XP SP3 32- bit
Canon BJ-330 Setup For Windows:
  • For the begin, you will require to prepare all of the things that you require such as the laptop, the printer, the USB cable that links the printer to the laptop computer, as well as likewise the CD driver.
  • Make certain the USB cable television works with the USB slot in your laptop.
  • If you lost the CD driver, then you can merely download the installation documents from the website.
  • Make sure you download and install the one that suit your printer design.
  • Once you have actually prepared all of those things, you just need to just run the installment setup program that you currently have, from the CD driver or from the data that you downloaded.
  • The next point that you require to do is waiting on the entire procedure to be finished.
  • During this time around, you will be asked to pick some alternatives such as the elements, the setup areas, your name, as well as some other things.
  • Make certain you fill up the choices properly.
  • Once the setup wizard is ended up, your printer is ready to go. You require to start printing a web page to make certain that the printer has been efficiently installed.
Canon BJ-330 Setup For Mac:
  • Procedures for the download and also installation
  • Download the data. For the location where the data is saved, check the computer system settings.
  • Double-click the downloaded and install file and place it on the Disk Image.
  • Double-click the installed Disk Image.
  • Double-click the packaged data in the folder. Installation begins immediately.
Canon BJ-330 Wireless Setup:
  • Make sure that the printer Canon BJ-330 is switched on.
  • Press and also hold the [Wi-Fi ] switch on the top of the printer up until the orange alarm lamp flashes once and then release it.
  • Make sure that the Wi-Fi switch starts to blink blue and then most likely to your accessibility point and press the [WPS] button within 2 minutes.
  • Make sure that your printer is activated.
  • Load a sheet of A4 or Letter-sized plain paper.
  • Press and hold the Cancel Button, button until the orange alarm lamp flashes 15 times and then launch it. The network info web page will certainly be printed.
  • This concludes the WPS configuration treatment.
  • Please now proceed by setting up the software to make the most out of your Canon BJ-330
  • If you do not have the installment CD that featured your product, please download the handbooks and also software.
  • If the Canon BJ-330 cordless configuration is still falling short after following this guide, please call us for further assistance.

Canon BJ-330 Software and Driver Download:

Operating System
Download
Canon BJ-330

close